When the Indicators Provide No Help - 79
·The image is
disturbed.
·Noise appears
●Has the cable been connected correctly?
see page26, 36
●Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer’s instruction manual for details on how to amend the
signals.
see page26
●Has the [Sync., Tracking and Position] been adjusted?
The image can be adjusted by regulating the [Tracking] and [Sync]
buttons on the projector while monitoring the image on screen.
Adjustments can also be made by opening the [Menu].
see page50, 66
●Has the cable length been extended?
There are cases where noise will occur if the cable length is extended.
●Has the signal format setting for the image been set correctly?
·In the case of computer images:
Set the signal format with [Menu] − [Video] − [Resolution]. There are
cases where the image signals being input cannot be determined in
the [Auto] mode.
see page66
·In the case of video images:
Select the video signal format with [Menu] − [Video] − [Video Signal].
There are cases where the video image signals being input cannot be
determined in the [Auto] mode.
see page67
●Are the settings under [Menu] [Settings] [BNC] correct for your
system?
·For computer images:
Set to [RGB].
see page30
·For video images:
For component video signals, set to either [YCbCr] or [YPbPr]
depending on your input signal.
see page37, 38
For RGB Video signals, set to [RGB].