Adjusting the Projection Position (Image Shift)

16

 

When you cannot setup this projector directly in front of the screen, the projection position can be finely tuned without moving this projector.

Using the Remote Control

Using the Control Panel

PROCEDURE

A Using the button on the projector, perform zoom adjustment or keystone correction. sp.i

The Image Shift adjustment screen is displayed after you finish making adjustments.

B Adjust projection position.
C Pressscreen.the [Esc] button to close the adjustment

The screen closes automatically if no operations are performed for about 10 seconds.

•The projection position cannot be adjusted when zoom is set to maximum "wide".

•Even if you turn the power supply off, the "Image Shift" settings you make are kept. When either the projector position or the angle of the projector is changed, you can readjust or perform the following operations.

Control Panel

Press and hold down the [Wide] and [Tele] buttons for more than one second.

•You can also make adjustments from the configuration menu. sp.35