Epson EMP-S3 List of Functions, "Image" Menu

List of Functions	33

"Image" Menu

The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source.

Computer/RGB video

Component videog/ Composite videog/ S-Videog

Sub-menu	Function
Color Mode	Select the quality of the image to suit your surroundings. sp.14

Brightness	Adjusts the image brightness.

Contrastg	Adjusts the difference between light and shade in the images.

Color Intensity	Adjusts the colour intensity for the images.

Tint	(Adjustment is only possible when component video or NTSC signals are being input.) Adjust the image tint.

Sharpness	Adjusts the image sharpness.

Color Temp.g	You can adjust the overall tint of images. If you select "High", images appear bluish, and if you select "Low", images appear reddish.
	(This item cannot be selected if "sRGBg" has been selected as the "Color Mode" setting in the "Image" menu.)

Color	Adjusts the red, green, and blue colour strength of the image.
Adjustment	Red: Adjust the intensity of the red component.
	Green: Adjusts the intensity of the green component.
	Blue: Adjusts the intensity of the blue component.
	(This item cannot be selected if "sRGBg" has been selected as the "Color Mode" setting in the "Image" menu.)

Reset	Resets all adjustment values for the "Image" menu functions to their default settings.
	If you would like to return all menu items to their default, see "Reset All". sp.39

Contents

Page Projection Procedure Connecting to Visual Equipment Turning on and Projecting Setup Connecting to Visual Equipment Turning on and Projecting Notations Used in This Guide Contents Appendices Projector Features Page Part Names and Functions Control Panel •[Menu] button sp.32 • [Power] button sp.i • Indicatorstates sp.43 Rear •Computer port sp.i • Monitor Out port sp.65 •Power inlet sp.i •S-Videoport Base • Foot adjust lever • Front adjustable foot • Lens cover string attaching stay • Air filter (air intake vent) sp.56, p.62 Remote Control • [Page down] [Page up] buttons sp.24 • Remote control light-emittingarea •[E-Zoom]button () () sp.22 •[Enter] button sp.24, p.32 Adjusting and changing the image Adjusting the Image Quality Adjusting the Projection Position Adjusting the Volume Changing the Projected Image Adjusting the Image Quality B Adjust the tracking until the vertical stripes disappear from the image C Pressmenu.the [Menu] button to exit the configuration Adjusting the Sync A Select "Signal" from the configuration menu, and then select "Sync tracking contrast Selecting the Projection Quality (Color Mode) p.33 Adjusting the Projection Position (Image Shift) Adjusting the Volume Changing the Projected Image (Source Search) Useful Functions Functions for Enhancing Projection Security functions Functions for Enhancing Projection Changing the Aspect Ratio (Resizing) Displaying the Pointer (Pointer) A Display the pointer You can also make this setting using the "Resize" command in the "Signal" menu B Move the pointer icon sp.35 Enlarging Part of the Image (E-Zoom) A Start E-Zoom B Move the cross to the area of the image that is to be enlarged or reduced C Enlarge Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) Page Page Security functions Setting Password Protect A Holdseconds.down the [Freeze] button for approximately B Turn "Power ON Protect" on C Turn "Password Timer" on D Turn "User’s Logo Protect" on E Enter the password Operation Button Lock Function A From the configuration menu, select "Settings" - "Operation Lock B Set to "ON C When"Yes".the confirmation message is displayed, select There are two methods to cancel the projector's control panel lock Configuration Menu Using the Configuration Menu List of Functions Using the Configuration Menu List of Functions "Signal" Menu "Settings" Menu "Extended" Menu Page "Info" Menu "Reset" Menu Troubleshooting Using the Help Problems Solving Using the Help Page Problems Solving Lamp or Temp indicator flashes orange Page When the Indicators Provide No Help Problems relating to images Page Page Page Page Problems when projection starts Other problems Page Appendices Installation Maintenance Saving a User's Logo Checking Projected Images on an External Installation Maintenance Replacing Consumables Replacing the batteries A Remove the battery cover B Insert the batteries C Replace the battery cover Lamp Replacement Period "Brightness Control" sp.35 ·When used continuously at high brightness: Approx. 1900 hours ·When used continuously at low brightness: Approx. 2900 hours •Contact your dealer for a spare lamp C Loosen the two lamp fixing screws D Take out the lamp E Install the new lamp F Install the lamp cover Resetting the Lamp Operating Time A Connect the power cable and turn on the projector C When "Execute?" appears, select "Yes Replacing the Air Filter B Remove the air filter C Install the new air filter Dispose of used air filters properly in accordance with your local regulations Air filter frame: Polycarbonate, ABS plastic Saving a User's Logo C When "Choose this image as the User's Logo?" appears, select "Yes User's logos can be saved at up to 400 ⋅ 300 dots in size E When "Select this image?" appears, select "Yes F Selectscreen.the zoom rate from the Zoom rate setting G When "Save this image?" is displayed, select "Yes Checking Projected Images on an External Monitor (Monitor Output) Optional Accessories and Consumables Glossary Page List of ESC/VP21 Commands USB Connection Setup A Download the USB driver (USB-COMDriver) from the EPSON website to your computer B Installcomputer.the downloaded USB driver onto your Change the "Link21L" setting in the "Extended" menu to "ON List of Supported Monitor Displays Specifications Appearance Index Page Page General Notice: