Problems Solving

48

 

 

 

 

The message "Not Supported." is displayed

 

 

 

Check

Remedy

 

 

 

 

 

 

 

 

Are the image signal format settings

If a composite videog or S-Videogsource is connected to the projector, use the "Video Signal" menu

correct?

command to select the signal format. "Signal" - "Video Signal" sp.34

 

 

 

 

 

 

 

 

 

 

Only when projecting images

 

 

 

 

 

 

 

from a video source

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Does the mode match the frequency and

Refer to the documentation provided with your computer for details on changing the resolution and

resolution of the image signals?

frequency of the image signals being output from the computer.

 

 

 

 

 

 

 

"List of Supported Monitor Displays" sp.71

 

Only when projecting computer images

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The message "No Signal." is displayed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check

Remedy

 

 

 

 

 

 

 

 

Are the cables connected correctly?

Check that all of the cables required for projection are securely connected. sp.i

 

 

 

 

 

 

 

 

Has the correct video input port been

Press the [Computer], [S-Video] or [Video] button on the remote control or the [Source Search] button on

selected?

the remote control or the projector's control panel to change the image. sp.18

 

 

 

 

 

 

 

 

Is the power for the computer or video

Turn the power on for the devices.

source turned on?

 

 

 

 

 

 

 

 

 

Are the image signals being output to the

If the image signals are only being output to the computer's LCD monitor or to the accessory monitor,

projector?

you need to change the output to an external destination as well as the computer's own monitor. For some

 

 

 

 

 

 

 

computer models, when the image signals are output externally, they no longer appear on the LCD

 

 

Only when projecting images from

 

 

 

 

 

monitor or accessory monitor.

 

 

a laptop computer or computer

 

s Computer documentation, under a title such as "External output" or "Connecting an external

 

 

with a built-in LCD screen

 

monitor"

 

 

 

 

 

 

 

If the connection is made while the power is already turned on, the function [Fn] key that switches the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

computer's video signal to external output may not work. Turn the power for the projector and the

 

 

 

 

 

 

 

computer off and then back on again. sp.i