Problems Solving

52

 

 

 

 

Problems when projection starts

Power does not turn on

Check

Remedy

 

 

Have you pressed the [Power] button?

Press the [Power] button to turn the power on.

 

 

Are all of the indicators switched off?

The power cable is not connected correctly or power is not being supplied. Connect the power cable to

 

the projector correctly. sp.i

 

Alternatively, check the circuit breaker to see if power is being supplied.

 

 

Do the indicators turn off and on when the

There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the

power cable is touched?

power cable. If this does not solve the problem, stop using the projector, disconnect the power cable from

 

the wall outlet and contact the nearest address provided in the "International Warranty Conditions"

 

section of the Safety Instructions/World-Wide Warranty Terms booklet.

 

 

Other problems

No sound can be heard or the sound is faint

Check

Remedy

 

 

Is the audio source connected correctly?

Check that the cable is connected to the Audio port.

 

 

Has the volume been adjusted to the

Adjust the volume so that sound can be heard. sp.17

minimum setting?

 

 

 

Is A/V Mute mode active?

Press the [A/V Mute] button on the remote control to cancel the A/V mute function. sp.20