Problems Solving

50

 

 

 

 

Image is truncated (large) or small

 

Check

Remedy

Has the "Aspect ratiog" been set

Press the [Resize] button on the remote control. sp.21

correctly?

 

 

 

 

Is the image still being enlarged by the

Press the [Esc] button on the remote control to cancel the E-Zoom function. sp.22

E-Zoom function?

 

 

 

 

Has the "Position" setting been adjusted

If analogue RGB images from a computer or RGB video images are being projected, press the [Auto]

correctly?

button on the remote control or the [Enter] button on the projector's control panel to carry out automatic

 

 

adjustment.

 

 

If the images have not been correctly adjusted after using the automatic setup function, adjust the setting

 

 

manually using the "Position" menu command.

 

 

If signals other than analogue RGB images from a computer or RGB video images are being input, adjust

 

 

the setting manually using the "Position" menu command. "Signal" - "Position" sp.34

 

 

 

Has the computer been set for dual

If dual display has been activated in the Display Properties of the computer's Control Panel, the projector

display?

will only project about half of the image on the computer screen. To display the whole of the image on

 

 

the computer screen, turn off the dual display setting. sComputer video driver documentation

 

Only when projecting computer images

 

 

 

 

 

Has the correct resolution been selected? Set the computer so that the signals that are output are compatible with this projector.

Only when projecting computer images

"List of Supported Monitor Displays" sp.71 sComputer documentation