Table 5-5. The Printer Does Not Operate at All
Cause Step Checkpoint Finding Soluti on
Connector CN207 on the
C169 MAIN-B Board may be
disconnected. 1Is connector CN207 on the
C169 MAIN-B Board
disconnected? Yes Connect CN207 on
the board.
The fuse on the PWB-E board
may be blown. 2Has the fuse blown on the
PWB-E board? Yes Replace the fuse.
PWB-E board may be dead.
3
With power on, is there an
output of +5 VDC between pin 4
(+) and pin 3 (–) for CN207 on
C169 MAIN-B Board?
No
Replace the PWB-E
board.
C169 MAIN-B Board may be
dead. 4——Replace the C169
MAIN-B Board.
Table 5-6. Both LED Lights Do Not Come OnCause Step Checkpoint Finding Solution
The C169 MAIN-B Board may
be dead. 1If you change the C169 MAIN-B
Board, do the LEDs come on? Yes Replace the C169
MAIN-B Board.
Table 5-7. The LED Does Not Come On (1)EPL-5500 Service Manual Troubleshooting
Rev. B 5-7