Epson FX-870/1170 Note:, Character Table, Table 1-17. Group 2 Features (ESC/P Mode)

Printer Features

To change the settings shown in Table 1-17, Group 2 Features (ESC/P mode), or in Table l-18, Group 2 Features (7BM mode), follow the steps below:

1.Turn on the printer while pressing the FONT and PAUSE buttons. The printer beeps once and prints the current character table for either ESC/P or IBM mode on the paper loaded in the paper path.

2.Press the FONT button to select the character table. The FONT, CONDENSED, and BEADY LEDs turn on, off, or blink to show your selection. Press the FONT button as many times as necessary until the FONT, CONDENSED, and BEADY LEDs indicate the character set you want.

3.Turn off the printer. The settings are stored in non-volatile memory.

Table 1-17.Group 2 Features (ESC/P Mode)

			Character Table		I
OFF	OFF	ON	I t a l i c	U.S. (standard setting)
OFF	OFF	BLINKS		France
OFF	ON	OFF		Germany
OFF	ON	ON		U.K.
OFF	ON	BLINKS		Denmark
OFF	BLINKS	OFF		Sweden
OFF	BLINKS	ON		Italy
OFF	BLINKS	BLINKS		Spain
ON	OFF	OFF	Character table	PC437
ON	OFF	ON		PC850
ON	OFF	BLINKS		PC860
ON	ON	OFF		PC863
ON	ON	ON		PC865
ON	ON	BLINK		BRASCI I
ON	BLINK	OFF		Abicomp

Note: When the character table PCxxx is selected, that is assigned as the table selected by the,ESC tl command. Then ESC tl and ESC 6 are set as defaults. (Codes 80-9FH are printable characters.)

EpsonFX-870/1170 1-21