3-12 The Automatic Document Feeder Option
R4C345
Rev. C
A5 size CHAP3.FM
10/7/99 Pass 0
LProof Sign-off:
<tantoname> SEI K.Ito M.Fujimori
<leadername> M.Fujimori
<editorname> SEI G.Hildebrand
6. Click Scan.
After scanning the entire stack of do cuments, a window with
thumb-nail images will appear. In this window you can select and
change the orientation of the scanned images.
Scanning only part of the document area
To scan just a part of an image, follow the steps below.
1. Load the first page of the documen t in the Automatic
Document Feeder as described on page 3-8.
Note:
Do not set more than one page of documents at this time. If you set
multiple pages at this time, the second page will be fed right after
the first page is scanned and may become stuck in the middle of
document path as if the paper is jammed. In this case, you have to
remove the second page from the document path and load it again.
2. Start the PageManager software and select Acquire from the
File menu.
3. In the dialog box of EPSON TWAIN Pro or EPSON TWAIN
Pro Network, Click Preview. The document is ejected after
previewing.
4. Draw a marquee (frame around a certain area) to define the
part of the image you want to scan by d ra gging the mouse
pointer over that area. Refer to Chapter 4 of the EPSON
TWAIN Pro User's Guide for information on making m arquees
and settings in EPSON TWAIN Pro.
5. Set document(s) to be scanne d in the Automatic Document
Feeder including the ejected document.