Epson GT-10000 4-10 , Part of the image is distorted or blurred., Edges of the document are not scanned., Colors are patchy or distorted at the edges of the image.

4-10 Maintenance and Troubleshooting
R4C345
Rev. C
A5 size CHAP4.FM
10/7/99 Pass 0
LProof Sign-off:
<tantoname> SEI K.Ito M.Fujimori
<leadername> M.Fujimori
<editorname> SEI G.Hildebrand
Part of the image is distorted or blurred.
Cause What to do
Document condition or
placement Make sure the document is unif ormly flat against the document table. A
documen t that is w rinkled or warpe d
can cause problems.
Edges of the document are not scanned.
Cause What to do
Document larger than
scanning area If the document is too large, position it s o t he a re a yo u w an t to sc an i s w ith in
the limit marks on the edge guides of
the document table.
Unscanned area of
document is positioned out
of scanning area
Adjust position of the document
guide strip so the area you want to
scan is within the limit marks on the
edge guides of the document table.
Colors are patchy or distorted at the edges of the image.
Cause What to do
Document condition A document that is very thick or
warped at the edges can cause
discoloration. Cover the edges of the
document with paper to block outs ide
light.
Improper placement of
document Make sure the docume nt is flat against the document table.