Epson GT-10000 Scanning from the Automatic Document Feeder

3
The Automatic Document Feeder Option 3-11
R4C345
Rev. C
A5 size CHAP3.FM
10/7/99 Pass 0
R
Proof Sign-off:
<tantoname> SEI K.Ito M.Fujimori
<leadername> M.Fujimori
<editorname> SEI G.Hildebrand
Note:
❏Opening the Automatic Document Feeder while scanning is in
progress will result in an option error and may result in a paper
feeding error.
❏Always close the Automatic Document Feeder before scanning or
using the feeder.
Scanning from the Automatic Document Feeder
The scanning instructions are d i vided into two sections; read
"Scanning the full document area " to scan an entire document or
image, or read "Scanning only part of the document area" to scan
only a certain part of an image or document.
Scanning the full document area
You do not need to use the preview feature when scanning a full
document or image. The scanner automatically finds and scans
the whole image. Follow the steps below to scan an image or
document.
1. Load paper in the Automatic Docum ent Feeder as described
on page 3-8.
2. Start the PageManager softwar e.
3. Select EPSON TWAIN Pro or EPSON TWAIN Pro Network
from Select Source of PageManager’s File menu depending
on your scanner configuration.
4. Select Acquire from File menu.
5. In the dialog box of EPSON TWAIN Pro or EPSON TWAIN
Pro Network, make sure that ADF-Single-side d or ADF-
Double-sided is selected from the Document Source li st. Also
choose appropriate settings for the scanning.