You can specify that the test be performed one time only or any number of times in the range from 1 to 9999. Running a test multiple times is for reliability testing of essential functions only; in most cases, running a test only once is sufficient.
To perform the test once only, press 1 then Enter. The program displays a submenu of more detailed tests for the device you are checking.
To perform the test multiple times, press 2 and Enter. You see this prompt:
Terminate checking if an error detected (Y/N)?
Press Y and Enter to terminate checking if the device produces an error, or press N and Enter to repeat the tests regardless of an error.
YOU see this prompt:
How many times
Type the number of times you wish to repeat the test, then press Enter. The tests for the device now start.
Resuming from an errorIf an error occurs during a test, the test stops at that point, and an error code and error message are displayed. If you want to record the problem, you can print out the message on your printer. You see this prompt:
Do you want a printout of the error message(s) (Y/N)?
To continue without printing the error message, press N and Enter.
Before you request a printout, be sure your printer is turned on and
Printer is not installed correctly.
Install correctly and enter Y, or
Enter N to cancel printing.
Correct the the problem and press Y and Enter to, continue printing, or press N and Enter to cancel printing.
After printing the error message, the program displays this prompt: