When loading another macro, the new macro’s settings immediately become the printers current settings. (See *Change Macro for a full explanation of current settings.) The first macro isn’t lost, because it remains stored in the LQ’s memory-that’s the advantage of a macro.

After loading a macro, you can still change the current settings with the *Change Macro mode. You might load a macro that calls for a right margin of 79. If you decide you want to change the right margin to 135 for only one document, you could use *Change Macro to reset the current setting to 135. However, the next time you recall the macro, it would still have the original setting of 79.

Loading a macro

1.From the SelecType main menu, press MENU until the display shows [*LOAD MACRO].

2.Press SETTING to display the five choices, as shown above. You can choose to load one of the four macros, or not load any macro.

2-6

SelecType