Check that the paper-thickness lever is set comctly for the paper you are using. See page 2-21.

The position of your paper supply may be preventing the paper from feeding stmight. Make sure the paper supply k not obstructed by a cable or some other object. Make sure that your paper supply k positioned withIn 1 meter (3.28 feet) of the printer.

Check that the holes on the sides of the paper are aligned with each other. Also, make sure the sprocl& units are locked and their covers are closed.

Check that paper size and thickness are within the s@ed range. See page 7-4.

Continous paper does not e$ect properly.

Thepagektoolang.Tearoff~epaperand~~itfromthe printer. Only use paper that k within the s@fied length range. See page 76

When a print command is sent from the arnpue the platen rotates but the cut-sheet feeder does not feed the paper.

Thecut-sheetfeedermaybeinanTectlyinstalled.Removethe

cut-sheetleederandinstaIlitasdesaibedinChapter4.CheckthatthepaperreleaseleverkinthesingMwxt position. See page 2-2Thepa~tlewrsmaybepulledforward.Pushbackonthe paper-set levers.Papermaybejammedneartheprinthead.TheremaybeonIyanesheetfettinthebm.Addmorepaper.