Epson LQ-1070+, LQ-570+ LOAD/EJECT, 1-10Setting Up the Printer, LQ mode self test, h4ake sure the printer is turned off and that the

By holding down a certain button while you turn on the printer, you can perfom the self test in draft or LQ mode, or you can print out a list of the current DIP-switch settings. These buttons are listed below

LOAD/EJECT	Draft mode self test
LF/FF	LQ mode self test
ALT	DIP-switch setting list

The self test begins by printing on the first and last lines of page 1. The printer then print the character samples on page 2

If you select LQ mode, the printer print the self test in every font, in turn.

1.h4ake sure the printer is turned off and that the paper-release lever is in the sin&sheet position.

2.While holding down the appropriate button, turn on the printer. The printer beeps and the platen turns for a few seconds, signaling that the printer is in self-test mode.

1-10 Setting Up the Printer