Epson LQ-1070+, LQ-570+ =-hPd, Theremaybeslackinthepaper.Adjustthe~~ofthe, Paper loaded from the cutgheet feeder is cmoked, pal, cut-sheet, bond envelopes in the

I

You may have loaded too many sheets in the cut-sheet keder’s

bin. You can load up to SO sheets in the singlebin cut-sheetfeeder,andupto150sheetsorupto30air-mallor25phfn bond envelopes in the high-capacity cut-sheet kder.

The cut-sheetfeeder feeds two or more t&&s at the same time.You may have loaded too many sheets in the cut-sheet ieedeis bin. See above.

You may have forgotten to fan the stack of paper before bading it into the bin. Remove the paper and f&n it.

Paper loaded from the cutgheet feeder is cmoked.The paper may be old or creased. Use only new, &an sheets ofpal=Theremaybetoomuchpaperinthestacker.Removethepaper from the stacker.Paper loaded with the optional pull tractor k awked or the paper j-

Thepulltxactorandpushtractorspmdcetunitsmaynotbe alignKlcom?cdy.M8ke!surethesproc2;etun.itsonboth-

=-hPdTheremaybeslackinthepaper.Adjustthe~~ofthe

sprocketunitstotakeup~yslack~thewidthofthe paper. Remove slack lengthwise by pulling out and rotating the gear on the right of the optional puJl tractor.

I