Choosing a Place for the Printer

When selecting a place to set up your printer, be sure to follow the guidelines below.

0 Place the printer on a flat, stable surface.

0Place the printer &se enough to the computer for the printer’s interface cable to reach it.

0Leave adequate room around the printer to allow for easy operation and maintenance.

cautio?c

QAwid loadions that ate subject to direct sunlight, excessive heat, moisture, or dust.

Q Use a grounded outlet do not use an adapter plug..a Place the printer where you can easily unplug the power cord.

0Avoid elect&al outlets contx&d by wall switches or automatic timers. Accidental disruption of power can wipe out information in the memory of your printer or computer.

cl Avoid outlets on the same circuit as large motors or other appliances that can cause fluctuations in line voltage.

0Keep the entire computer system away from potential sources of ekxtnxnagnetic interference such as loudspeakers or thebase units of con3ess telephones.

If you plan to use a printer stand, follow these guidelines:

0Use a stand that supports at least 16.0 kg (3!53 lbs) for the L&)-570+or 22.0 kg (48.5 lbs) for the LQ-1070+.

Setting Up the Printer 1-3