1
Setting Up the Printer 1-13
cCaution:
For LX-300+: You should use paper at least 210mm (8 1/4
inches) wide to run the self test; otherwise, the print head
prints directly on the platen.
For LX-1170: You should use paper at least 376mm (14.8
inches) wide to run the self test; otherwise, the print head
prints directly on the platen.
2. While holding down the LF/FF button, turn on the printer.
3. Slide the left edge guide until it locks in place at the guide
mark. Next, adjust the right edge guid e to match the width of
your paper.