Using the Printer Software 3-9
3
Once you have checked your printer driver settings and changed
them if necessary, you are ready to print.
Using the Printer Driver with Windows NT 3.5x
Printer software for Windows NT 3.5x is only provided for
LX-300+.
You can access the printer driver from your Windows
applications or from the Control Panel.
When you access the printer driver from a Windows application,
any settings you make apply only to the application you are using.
When you access the printer driver from the Control Panel, the
printer driver settings you make can apply to all your
applications.
To check and change printer driver settings, see “Changing the
printer driver settings” on page 3-10.
Note:
While many Windows applications override the settings made with the
printer driver, some do not, so you must verify that the printer driver
settings match your requirements.
Accessing the printer driver from Windows
applications
Follow these steps to access the printer driver from a Windows
application:
Note:
The steps in this procedure provide general guidelines on accessing the
printer driver. How you access the printer driver may differ depending
on your application. See your application manual for details.