2-20 Using the Printer
6. Slide the left sprocket unit so that its sprockets match the
position of the holes in the paper and lock the u nit in place.
Then slide the right sprocket unit to match the width of your
paper, but do not lock it. Move the paper support midway
between the two sprocket units.
7. Make sure your paper has a clean, straight leading edge. Open
the sprocket covers. Fit the first holes of the pape r over the
sprocket pins and then close the sprock et covers. Slide the
right sprocket unit to remove any slack in the pap er and then
lock it in place.