Running the Self Test
The built-in self test function demonstrates that the printer is
working properly. You can run the test with either con tinuous
paper or single sheets; this section describes the easier way, with
single sheets.
1. Make sure the printer is turn ed off and the paper-releas e lever
is pushed back to the single-sheet position. Raise the paper
guide upright.
cCaution:
You should use pa per at least 21 0 mm or 8 1/4 inc hes wide to
run the self test; otherwise, the print head prints d irectly on
the platen.
BB1-14
L
Blueberry REV.E
A5 size Chapter 1
95/04/17
1-10 Setting Up the Printer