The paper may be too long. Use paper that is within the specified
range. See the paper specifications in the Appendix.
Continuous paper does not feed properly
The tractor does not feed the paper.
Check that the paper-release lever is pulled forward to the
continuous-paper position. If not, turn off the pri nter, move the
lever, and turn it on again.
The paper may have come off the tractor. Reattach th e paper to the
tractor.
Paper feeding is crooked or the paper jams.
The position of your paper supply may be preventing it from
feeding straight. Make sure the paper supply is not obstructed.
Make sure that your paper supply is positioned within 1 meter
(3 feet) of the printer.
Make sure the printer cover is closed.
Make sure the edge guide postions are correct. Position the edge
guides at the diamond-shaped guide marks.
Check that the holes on the sides of the paper are aligned with
each other. Also, make sure the sprocket units are locked and their
covers are closed.
Check that the paper size and thickness are within the specified
range. See the paper specifications in the Appendix.
When you use side-crimped multi-part forms, the copies may not
align with the original. If this happens, raise the paper guide to
keep the printing position accurate.
R
Blueberry REV.E
A5 size Chapter 3
95/04/17
Troubleshooting 3-7