Epson LX-300 Using the Control Panel

Using the Control Panel

You can control simple printer operations—such as line feeding,

form feeding, loading and ejecting paper, and selecting

fonts—with the buttons on the control panel. The control panel

lights show the printer’s status and the current font.

Lights and buttons

PAUSE light

The orange PAUSE light is on when the printer stops printing.

Each time you turn on the printer, the light flashes briefly and the

beeper sounds four times. When the printer is out of paper, the

light flashes and the beeper sounds three times. The light also

flashes when you can tear off the last sheet at the edge of the

printer cover.

The PAUSE light goes on and the beeper sounds five times if an

error occurs.

FONT 1 and FONT 2 lights

The green FONT lights, 1 and 2, indicate the current font setting.

For more about selecting fonts, see page 2-4.

FONT button

Press the FONT button during normal operation to cycle through

the printer fonts listed on the control panel. When you press the

button, the FONT lights change to indicate your current selection.

For more about choosing a font, see page 2-4.

PauseLF/FFFont

Paper Park

Micro Adjust

12

Roman

Sans Serif

Draft

Draft Condensed

3sec

BB2-01

L

Blueberry REV.F

A5 size Chapter 2

95/05/25

2-2 Using the Printer

Contents

Main Page EPSON LX-300 Users Guide FCC Compliance Statement For United States Users ii For Canadian Users A5 size Front 95/04/17 Where to Get Help for United States Users For United Kingdom Users Epson product guarantee iv Use of options Safety information vi Contents Introduction Chapter 1 Setting Up the Printer Chapter 2 Using the Printer Chapter 3 Troubleshooting viii Appendix Index x Introduction Features Finding Your Way Around Warnings, Cautions, and Notes 2 w c Notes Important Safety Instructions 4 Chapter 1 Setting Up the Printer Unpacking the Printer 1-2 Choosing a place for the printer Assembling the Printer Installing the paper-feed knob 1-4 Attaching the paper supports Installing the ribbon cartridge w 1-6 Page 1-8 Plugging in the printer Running the Self Test 1-10 PAUSE 1-12 Connecting the Printer to Your Computer Using the parallel interface 1-14 Using the serial interface Setting Up Your Software 1-16 Microsoft Windows Using non-Windows software 1-18 Chapter 2 Using the Printer Using the Control Panel Lights and buttons 2-2 FONT 1 and FONT 2 lights FONT button Page Selecting fonts 2-4 Printing on Single Sheets Loading single sheets Adjusting the loading position Getting the results you expect 2-6 Printing on Continuous Paper Printing with the push tractor 2-8 Page 2-10 Switching back to single sheets Printing with the pull tractor 2-12 Page 2-14 Printing on Special Paper Adjusting the paper-thickness lever 2-16 Multi-part forms Labels Envelopes 2-18 Changing the Printer Settings 2-20 Page Printer setting descriptions Character spacing 2-22 Shape of zero Skip-over-perforat ion Character table Auto line feed Page length Auto tear off Tractor Installing and Using Options Cut-sheet feeder Page 2-26 Page Pull Tractor unit 2-28 Roll paper holder 2-30 Color upgrade kit 2-32 Page 2-34 Chapter 3 Troubleshooting Problems and Solutions FONT 3-2 LF/FF Power Supply Printing The printer does not print The print is faint or uneven Dots are missing in printed characters or graphics 3-4 Printed characters are not what you expected The print position is not what you expected Paper Handling Single sheets do not feed properly 3-6 Continuous paper does not feed properly Options When you use the cut-sheet feeder, the paper does not feed properly 3-8 Switching between the cut-sheet feeder and the push tractor does not work properly Using the pull tractor with the push tractor, continuous paper does not feed properly With color upgrade kit installed, printer doesnt operate properly 3-10 Appendix Printer Specifications Printing A-2 Paper Appendix A-3 A-4 Appendix A-5 Mechanical Electrical A-6 Environmental Safety approvals Interface Specifications Parallel interface specifications Serial interface specifications Serial pin assignments A-8 Printer Settings Appendix A-9 A5 size Appendix 95/04/17 Command Summary Sending printer commands A-10 Using the command summary Printer operation Data control Appendix A-11 Vertical motion Horizontal motion A-12 Overall printing style Print size and character width Appendix A-13 Print enhancement Word processing Character tables A-14 User-defined characters Appendix A-15 Color printing Graphics A-16 Index A Index 1 B C M N 2 O P T U Index 3 W Z