Epson LX-300 Changing the Printer Settings

Changing the Printer Settings

Your printer has internal settings that control simple functions

such as the page length and character set. These settings take effect

each time you turn on the p rinter, so they are also called default

settings.

Because the factory printer settings are designed to meet the needs

of most users, you probably will not need to change them. See

“Printer Settings” on page A-9.

Note:

Because software settings always override the printer’s default settings,

use your software program to control the printer, if possible. Se e your

software documentation for mo re information.

If you cannot use your software program to change the printer’s

settings, you can use the Pr inter Setting mode. Her e’s how:

cCaution:

Use paper at least 210 mm (8 1/4 inches) wide for single sheets

or 240 mm (9 1/2 inches) for continuous paper; otherwise the

print head prints directly on the platen.

Also make sure you have enough sheets of paper because the

printer prints several pages of help text.

1. Turn off the printer; if you use continuous paper, make sure

the paper is loaded correctly.

R

Blueberry REV.F

A5 size Chapter 2

95/05/25

Using the Printer 2-19

Contents

Main Page EPSON LX-300 Users Guide FCC Compliance Statement For United States Users ii For Canadian Users A5 size Front 95/04/17 Where to Get Help for United States Users For United Kingdom Users Epson product guarantee iv Use of options Safety information vi Contents Introduction Chapter 1 Setting Up the Printer Chapter 2 Using the Printer Chapter 3 Troubleshooting viii Appendix Index x Introduction Features Finding Your Way Around Warnings, Cautions, and Notes 2 w c Notes Important Safety Instructions 4 Chapter 1 Setting Up the Printer Unpacking the Printer 1-2 Choosing a place for the printer Assembling the Printer Installing the paper-feed knob 1-4 Attaching the paper supports Installing the ribbon cartridge w 1-6 Page 1-8 Plugging in the printer Running the Self Test 1-10 PAUSE 1-12 Connecting the Printer to Your Computer Using the parallel interface 1-14 Using the serial interface Setting Up Your Software 1-16 Microsoft Windows Using non-Windows software 1-18 Chapter 2 Using the Printer Using the Control Panel Lights and buttons 2-2 FONT 1 and FONT 2 lights FONT button Page Selecting fonts 2-4 Printing on Single Sheets Loading single sheets Adjusting the loading position Getting the results you expect 2-6 Printing on Continuous Paper Printing with the push tractor 2-8 Page 2-10 Switching back to single sheets Printing with the pull tractor 2-12 Page 2-14 Printing on Special Paper Adjusting the paper-thickness lever 2-16 Multi-part forms Labels Envelopes 2-18 Changing the Printer Settings 2-20 Page Printer setting descriptions Character spacing 2-22 Shape of zero Skip-over-perforat ion Character table Auto line feed Page length Auto tear off Tractor Installing and Using Options Cut-sheet feeder Page 2-26 Page Pull Tractor unit 2-28 Roll paper holder 2-30 Color upgrade kit 2-32 Page 2-34 Chapter 3 Troubleshooting Problems and Solutions FONT 3-2 LF/FF Power Supply Printing The printer does not print The print is faint or uneven Dots are missing in printed characters or graphics 3-4 Printed characters are not what you expected The print position is not what you expected Paper Handling Single sheets do not feed properly 3-6 Continuous paper does not feed properly Options When you use the cut-sheet feeder, the paper does not feed properly 3-8 Switching between the cut-sheet feeder and the push tractor does not work properly Using the pull tractor with the push tractor, continuous paper does not feed properly With color upgrade kit installed, printer doesnt operate properly 3-10 Appendix Printer Specifications Printing A-2 Paper Appendix A-3 A-4 Appendix A-5 Mechanical Electrical A-6 Environmental Safety approvals Interface Specifications Parallel interface specifications Serial interface specifications Serial pin assignments A-8 Printer Settings Appendix A-9 A5 size Appendix 95/04/17 Command Summary Sending printer commands A-10 Using the command summary Printer operation Data control Appendix A-11 Vertical motion Horizontal motion A-12 Overall printing style Print size and character width Appendix A-13 Print enhancement Word processing Character tables A-14 User-defined characters Appendix A-15 Color printing Graphics A-16 Index A Index 1 B C M N 2 O P T U Index 3 W Z