Character table
Character tables contain the characters and symbols used in
different languages. See the Appendix for specific characters.
Auto line feed
When the auto line feed feature is on, each carriage return (CR)
code is accompanied by a line feed (LF) code. If your printed text
is unexpectedly double-spaced, set this feature to off. If text lines
print on top of each other , set it to on.
Page length
This option is available only when you use continuous paper with
the tractor. You can set the page length to 8.5, 11, 12, 70/6, 5.5, 7,
17, 14, 8, 6, 4, 3.5, or 3 inches.
Auto tear off
When you use continuous pape r with the push tractor, this feature
advances the paper perforation to the tear-off position where you
can easily tear off the printed pages. When the printer receives
data, it automatically reverses the paper to the top-of-form
position and starts printing, so you can use all of the next sheet.
When you use the tractor to print on labels, set this feature to off.
Tractor
When you use the tractor as a pull or push tractor, leave this
option set to Single. If you install an optional tractor and use both
tractors as a push-pull tractor, set it to Double.
Interface
When this feature is set to Auto, the printer automatically switches
to the active interface until the end of the print job (when no data
is received from the selected interface for a specified amount of
time: either 10 seconds or 30 seconds). You can also specify either
the serial interface or the parallel interface.
R
Blueberry REV.F
A5 size Chapter 2
95/05/25
Using the Printer 2-23