Epson LX-80 Appendix H, Technical Specifications, .122 in, .122 in, Printing, dot, set, NLQ, NLQ, line, mode, size, Mode, Pica, feed), Roman, Elite, Impact, matrix, italic

Appendix H

Technical Specifications

Printing

Printing	method . . . . . . . . . . . . . . . .		Impact		dot		matrix
Printing	speed . . . . . . . . . . . . . . . . . . .		100 characters per second per line in
Paper feed		speed . . . . . . . . . . . . . . . . Approximately 150 ms/line (at 1/6
			inch/line)
			Approximately					100 ms/line (during
			continuous				line	feed)
Printing	direction . . . . . . . . . . . . . . Bidirectional, logic seeking
			Unidirectional (left to right) in
			graphics			mode
Character		set . . . . . . . . .	96	Roman			characters
			96 italic characters
			32	international characters
			32	italic		international characters
			32	graphic			characters
			96	NLQ		characters
			32	NLQ		international			characters
Character		size
Mode			Width inches					Height	inches
Pica				.083	in			.122	in
Pica expanded				.166 in				.122 in
Elite				.059 in				.122 in
Elite expanded				.118	in			.122	in
Compressed				.041	in			.122	in
Compressed expanded				.083	in			.122	in
Super/Subscript								.063	in

Line spacing . . . . . . . . . . . . . . . . . . . . . . . . Default is 1/6 inch. Programmable in increments of 1/72 inch and 1/216 inch

H-1