D
Data dump mode, F-6-8 Data transfer sequence, I-3Density. See Graphics mode Dimensions of printer, H-3DIP switches, D-1-3
Dot graphics. See Graphics Dot matrix, 23-27 Double-strike mode, 43
ESCape “G” turns it on; ESCape “H” turns it off. Can also be set with SelecType
Driver. See printer driver
Dumping data in hexadecimal, F-6-8
Elite mode, 24-25, 37-38
ESCape “M” turns it on; ESCape “P’ turns it off. Can also be set with SelecType
Embedded codes, 32 Emphasized mode, 41-43
ESCape “E” turns it on; ESCape “F:” turns it off. Can also be set with SelecType
Environment, specifications for, H-3Epson computer, 80, F-14ESCape code, 30
listed by function, C-l-3 listed by number, B-1-10
ESCape “!“. Master select, 47-49 ESCape “%“. Selects a character set, B-3
ESCape “&“. Defines characters, B-3Escape cc::.“. Graphics mode command, 81
ESCape “ -0”. Turns underline mode off, 46-47 ESCape ‘ -1”. Turns underline mode on, 46-47 ESCape “0”. Sets line spacing to 1/8”, 58 ESCape “1”. Sets line spacing to 7/72”, 58 ESCape “2”. Sets line spacing to 1/6”, 58
ESCape “3”. Sets line spacing in 216ths of an inch, B-4ESCape “4”. Turns italic mode on, 45-46
ESCape “5”. Turns italic mode off, 45-46 ESCape “8”. Turns paper-out sensor off, 59 ESCape “9”. Turns paper-out sensor on, 59
ESCape “:“. Copies ROM characters to the RAM area, B-4ESCape “<‘I. Turns one-line unidirectional mode on, B-4ESCape “?“. Reassigns an alternate graphics code, 81 ESCape “@,“. Reset code, 38
ESCape “A”. Sets line spacing in 72nds of an inch, B-5ESCape “C”. Sets the form length, B-5
ESCape “D”. Sets horizontal tabs, B-6
