4, ; rA4SizePaperpf /4
Fig. 25 Setting of Cut Paper Sheet
I
Fig. 26 Printer with Cut Paper Sheet Set Completely
NOTES: 1. The Paper End Detector function may be disabled under software control (ESC 8; refer to page 39) provided printing is left off within 7.5 mm from the paper bottom edge.
2.If the paper is set on the line marked 1/4as shown in Fig. 25, then the printing starts from a position 28.6 mm below the top edge of the paper. If the paper is set on the line marked 1/8. then the printing starts from a position 30.2 mm below the top edge of the paper.
STEP 8. Push the scale back into position and put the printer lid on the Printer. (See Fig. 26.)
- 1 7 -