Handling batteries When your PhotoPC 600 batteries wear out, you can
replace them with any of the following:
Single-use AA (LR6) alkaline batteries
Single-use AA (FR6) l i t h ium batteries
(longest battery life)
Rechargeable AA Ni-Cd batteries
Rechargeable AA Ni-MH batteries
wWarning:
To avoid the danger of fire or exp los ion, do not mix
different types of batteries. Do not a llow the battery
contacts to touch metal objects such as co ins or keys,
which could short out the battery’s circuits.
Note the following when handling batteries:
❏Do not use manganese batteries.
❏Replace all four batteries at the same time.
❏Do not drop, puncture, disassemble, or mutilate
batteries. Do not get them wet or expose them to fire.
❏When the camera is not used for long periods of
time, remove the batteries and store them at a low
temperature in a dry location.
❏Dispose of used batteries according to the battery
manufacturer’s instructions and in compliance with
all applicable laws. Contact your local governme nt
agency for information about battery recycling and
disposal.
❏If you use rechargeable Ni-Cd or Ni-MH batteries,
replace them with four fully-charged batteries. If you
find that your batteries run out faster after you
recharge them a number of times, make sure you
discharge them completely before recharging.
❏Battery life varies depending on the battery type and
the manufacturer.
1
R
Poppy Rev.B/TCAT
A5 size Chapter 1
97/09/18 pass 7
Getting Started 16