Attaching the Hand Strap To attach the hand strap, loop the strap around the
holder on the side of the camera as shown below.
Installing EPSON Photo!2 Software PhotoPC 600 comes with EPSON Photo!2 software that
lets you transfer your pictures from the camera to your
computer and place them into documents. You can also
use this software to take pictures and change camera
settings from your computer.
Note:
When you install EPSON Ph oto!2, the EPSON Photo !2
Program Uploader utility is also installe d automatically.
Installing the software in your PC
Follow the steps in this section to install your EPSON
Photo!2 software.
For Windows 95 or NT 4.0
1. Insert the camera software CD shipped with your
camera in the CD-ROM drive. (If you use the floppy
disk version, insert it in a disk drive.)
2. Double-click the My Computer icon.
3. Double-click the CD-ROM icon. You see the EPSON
folder. (If you use the floppy disk version,
double-click the floppy disk icon.)
4. Open the EPSON folder and double-click Disk 1.
Depending on the country, the EPSON folder may
contain multiple-language versions of the software.
Double-click the folder for your preferred language
and double-click Disk 1.
5. Double-click the SETUP.EXE icon. Follow the
instructions on the screen.
1
R
Poppy Rev.B/TCAT
A5 size Chapter 1
97/09/18 pass 7
Getting Started 17