Using the Photo Control Menu The Photo Control menu allows you to erase,
lock, or unlock images in your camera, and to
get information on the camera’s internal and
CompactFlash Card’s memory. This menu al so al low s
you to format memory cards and copy images bet ween
the camera and the card.
Access the LCD monitor menus in Playback mode and
select the Photo Control menu as described on page 3-2,
then follow the instructions below for the Photo Control
feature you want to use.
Erasing photos
There are two ways to erase photos from your camera:
Select Photo or Erase All. Use Select Photo to erase one or
several photos at a time; use Erase All to erase all ph otos
from the camera’s memory. Follow the steps below for
the method you want to use.
Note:
Be sure to unlock the ph otos before erasing the m. See “Locking
photos” on page 3-11 for instructions.
Select Photo
1. With the Photo Control menu selected, press the
SELECT button. The Photo Control features appear
on the screen, with the Erase option highlighted in
orange.
2. Press the
SELECT button to enter the Erase mode, then
press the or button to choos e Select Photo.
3. Press the
SELECT button, then press the or
button to move forward or back through the
images in the c a mera until the p hoto you want to
erase appears on the screen.
4. Press the SELECT button. A confirmation message
appears asking if you are sure you want to erase that
image. Press the SELECT button to erase, or press
BACK to cancel your job. If you want to erase other
photos at the same time, use t he or button to
display them, then press the SELECT button to select
them.
Note:
To cancel the selection of a photo, simply press the
SELECT button again.
If you try to select a locked ph ot o, the camera beeps and
you cannot select that photo until you unlo ck it,
as described on page 3-11.
LPoppy+ Rev.C
A5 size Chapter 3
5/12/98 pass 1
3-10 Using the LCD Monitor Menus