If your computer is equipped with a Type II PCMCIA
memory card slot, you can access images stored on
memory cards directly from your computer by using the
optional PCMCIA adapter (B867041). See page 5-3 for
more information on this option.
Installing a CompactFlash Card
Follow these steps to install a memory card in the camera:
1. Before you open the memory card cover, make sure
the camera and the monitor mode switch are turned
off.
2. Open the memory card cover, and insert the card all
the way into the memory card slot, as shown below.
3. After you have installed the memory card, close the
memory card cover.
When a memory card is installed, photos you take are
stored in the card’s memory rather than the camera’s
internal memory. The number of pictures you can store
in the memory card appears in brackets on the camera’s
display panel.
When a memory card is installed, you may notice a delay
between the time you press the shutter button and when
the camera beeps. To avoid blurring, be sure to hold the
camera still until the camera beeps. The photo processing
time also increases by a few seconds when using the
memory card.
cCaution:
Never remove the card while the camera is acce ssing it.
Data in the card may be lost or damaged.
arrow mark
brackets
LPoppy+ Rev.C
A5 size Chapter 5
5/8/98 pass 1
5-2 Camera Options