Getting memory information
The memory information mode allows you to get
information on both your camera’s internal mem ory and
optional CompactFlash memory cards.
With the Photo Control menu selected, press the SELECT
button. Then press the button until Memory Info is
highlighted. Press the SELECT button. Information on
internal and external memory appears, includ ing the
number of photos you can take , the number of photos
stored in internal memory and external memory ,
and the total number of photos that can be stored at the
current image quality setting .
Copying photos
When an optional CompactFlash memory card is
installed in your camera, you can use the copy mode to
copy photos between the camera’s internal memory an d
the memory card. Follow these steps:
1. Make sure the memory card is installed in the camera.
2. With the Photo Control menu selected, press the
SELECT button. Then press the button until Copy
is highlighted in orange.
3. Press the
SELECT button to enter the Copy mode, then
press the or button to select Camera→Card or
Card→Camera as the copy destination.
4. Press the
SELECT button, then press the or
button to move forward or back through the
images in the c a mera until the p hoto you want to
copy appears on the screen.
5. Press the
SELECT button. An orange frame appears
around the photo. If you want to copy several photos
at the same time, use the or button to display
them and press the SELECT button each time.
Note:
If you select more photos than the card or camera can
hold, the error message “Insufficient Memory” appears.
If no external memory card is installed, the erro r
message “No Card” appears.
6. When you have selected all the photos you want to
copy, press the BACK button. A message appears
asking you to confirm your selections.
7. Press the
SELECT button to copy the images and return
to the Photo Control menu; press the BACK button to
cancel and return to the Photo Control menu.
3
R
Poppy+ Rev.C
A5 size Chapter 3
5/12/98 pass 1

Using the LCD Monitor Menus 3-13