3. To change color and printing mode, press or
button to select the option you want to change, then
press the SELECT button. The setting for that option
appears on the screen.
When the photo is not printed in the correct position,
select Adjust a nd press the SELECT button. Then
follow the instructions on the LCD screen to move
the print left or right a maximum of 2.0 mm in 0.2
mm increments, so that printing occurs in the correct
position.
4. Press the or button to select a setting, then
press the SELECT button.
5. Connect the camera to the printer as described on
page 4-2, then turn on the printer and load EPSON
Photo Stickers. See the loading instructions that came
with the Photo Stickers.
6. When you are ready to start printing, press the
button to select Print.
7. Press the SELECT button. The camera starts sending the
image data to the printer.
While the camera is sending data and printing, the
LCD screen goes blank and star icons move across
the display panel on the top of the camera.
Note:
To cancel printing, hold down the camera’s BAC K button
for about three seconds. A m essage stating printing is
canceled appears on the L C D screen for three seconds,
before returning to the Direct Print me nu. The printer
stops printing and eje cts the paper.
8. When printing is finished, the LCD screen returns to
the Direct Print menu, and the display panel returns
to normal.
When you finish printing, close the Direct Print program
by pressing the BACK button. Then slide the monitor
mode switch to OFF and turn off the printer.
Index print modeFollow these steps to print using the Index print mode:
1. Access the Direct Print program as described on pa ge
4-4. Press the button to highlight Layout, then
press the SELECT button. With Index selected, press
the SELECT button again.
2. Select Photo and press th e SELE CT button. Choose All
if you want to print all the images, then press the
SELECT button once more.
4
R
Poppy+ Rev.C
A5 size Chapter 4
5/8/98 DR, pass 0