Preparing to Use the Direct Print Program
You need the following items to use the Direct Print
Program.
Digital camera: EPSON PhotoPC 700
Printer: EPSON STYLUS PHOTO, EPSON
STYLUS PHOTO 700, EP SON STYLUS
PHOTO EX, EPSON STYLUS COLOR
600, EPSON STYLUS COLOR 800,
EPSON STYLUS COLOR 850
Printer cable: Apple System Serial-8 cable
(8-pin mini-circul a r connector)
Note:
Use of the optional AC adapter (B 86703 ) is also
recommended, to avoid batteries running out while printing.
The Direct Print program is already installed in EP SON
PhotoPC 700. If you uninstalled the program and w ant to
use it again, you can reinstall the program (the Direct
Print kit is packed with your camera). For instruction s on
installation, see your digital camera software manual .
Connecting Your Camera to the Printer
Follow these steps to connect the camera to the
appropriate EPSON printer.
1. Make sure both the camera and the printer are turned
off.
2. Connect one end of the interface cable to the serial
connector on the back of the printer.
Note:
The interface cable must be purchased separate ly (see
previous section). Do not use the PC connection cable or
Macintosh adapter cable t hat came with the camera.
LPoppy+ Rev.C
A5 size Chapter 4
5/8/98 DR, pass 0
4-2 Using the Direct Print Prog ram