NOTE

If you connect your printer and PhotoPlus scanner to the same computer port, make sure the printer is turned on when you scan.

1If you have a printer connected to your computer’s parallel port, unplug it.

2Plug the PhotoPlus parallel connector into your computer’s parallel port as shown to the right, and tighten the screws.

NOTE

If you have a low-profile computer, the parallel connector may not fit in your port. You may need to use an extender connector, which you can purchase at any computer store.

:

parallel

port 1

PhotoPlus parallel connector

3Plug the power adapter into the power socket on the PhotoPlus parallel connector. On some computer models, you may need to arrange the adapter plug to fit around your monitor cable.

power

adapter

power socket

Getting Started 1-3