Follow these steps:
1To test your magnet designs, make sure you have regular paper in your printer’s tray. Don’t take out the paper or load the special coated paper. Just click the red button to go on to the next screen:
2Click the red button to print your test sheet.
3If you want to print another test, click the blue button and repeat steps 1 and 2.
4When you’re satisfied with your test print, remove the regular paper and load a sheet of the special Magnet Kit paper, following the instructions on the screen.
5Click the blue button to print. You may need to gently guide the special paper into the printer by hand.
6When you’re finished printing, click the red button to go on.
Putting Your Magnets Together
After your designs are printed, you need to trim the paper, attach it to the adhesive magnet sheet, and cut out the magnets. Colorful animation on the screen shows you exactly what to do.
7
PrintPaks Magnet Kit: Family Stuff