Irregular | Cannot recognize the | Connect on external | |
external | device. | storage device that is | |
device.*2 |
| compatible with the | |
|
|
| printer. |
|
|
|
|
Printer | Temperature inside | If you use the printer in | |
temperature | the printer is too high. | places subject to | |
error*3 | Print quality may | direct sunlight, heat | |
|
| decline. | sources, or high |
|
| To resolve this | temperature such as in |
|
| the car, move the | |
|
| problem, see your | |
|
| printer to the shade or | |
|
| printer's | |
|
| a cool place. When | |
|
| documentation. | |
|
| the temperature inside | |
|
|
| |
|
|
| the printer decreases, |
|
|
| the error is canceled. |
|
|
|
|
Bluetooth | Error in the data. The | Check the data. | |
data error | print results may not |
| |
|
| be perfect. |
|
|
|
|
|
|
| Error in the data. The | Check the data. |
|
| image cannot be |
|
|
| printed. |
|
|
|
|
|
|
| The image is too large | Print the data from a |
|
| to print with Bluetooth. | memory card or |
|
|
| computer. |
|
|
|
|
|
| The image is too | Check the data. |
|
| complex to print with |
|
|
| Bluetooth. |
|
|
|
|
|
*1 This warning appears when the Print button is pushed, and it disappears after three seconds.
*2 This warning is displayed for one second every 3 seconds.
*3 This warning appears when the Print button is pushed, and disappears when the OK button is pushed. It appears only once during power on.
Print and Noise Problems
PictureMate makes an unexpected noise after you install a photo cartridge.The first time you install the photo cartridge, PictureMate will charge its print head for about three minutes. Wait until charging finishes before you turn it off, or it may charge improperly and use more ink the next time you turn it on.
Your PictureMate makes an unexpected noise when you turn it on or after it has been sitting for awhile.
PictureMate is performing routine maintenance.PictureMate sounds as though it is printing, but nothing prints.❏PictureMate may be preparing to print.❏Make sure the print head nozzles are not clogged. To clean the print head, see “Cleaning the Print Head” on page 66.
❏PictureMate won’t work properly if it’s tilted or at an angle. Place it on a flat, stable surface that extends beyond the printer base in all directions.
English
Troubleshooting 73