❏Please check your local EPSON customer support website where to buy or visit your local dealer.

& See “Contacting Customer Support” on page 78

Using the Optional Battery

Note:

❏Install the battery after installing the first photo cartridge and after ink charging is finished.

❏You cannot save data on the memory card to an external device when using the battery. Connect the AC adapter to PictureMate when you save data.

❏When you copy data on a computer to your memory card, confirm that there is enough power in the battery. If the battery runs out, saving is canceled, and corrupted data may remain on the memory card.

For safety instructions for the battery, see “When using the optional battery” on page 9.

Installing the battery

Follow the steps below to install the battery.
1.Make sure that PictureMate is turned off.2.Unplug the AC adapter from the printer.3.Open the battery cover.

4.Insert the battery into the compartment in the direction shown below until it is fixed in place.

5.Close the battery cover.
80Options and Consumable Products