Removing the battery
1.Make sure that PictureMate is turned off.
2.Open the battery cover.
3.Move down the battery latch and pull out it.
4.Close the battery cover.
Charging the battery
After installing the battery, charge the battery using the AC adapter.
1.Make sure that the battery is installed.
2.Connect the power cord and AC adapter, then plug in PictureMate.
When PictureMate is off, the power light blinks during charging. When the battery is fully charged, the power light turns off.
When PictureMate is on during charging, icon blinks on the LCD panel. When the battery is
fully charged, icon appears.
Note:
The battery may not be charged correctly if the temperature of the operation is not guaranteed.
Checking the battery status
Using the LCD panel
The battery status is always displayed at the top right corner of the LCD panel.
Icon Status
Indicates low battery power
English
Options and Consumable Products | 81 |