3. Open the cartridge cover.

cCaution:

Never attempt to open the cartridge cover while the print head is moving. Wait until the print head has stopped at the replacement position.

4. Squeeze the tab and lift it straight up.

cCaution:

Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior.

Note:

If it is difficult to remove the cartridge, lift the cartridge with more force until comes out.

5.Remove the new cartridge from its package.

c Caution:

Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package.

Do not touch the green chip on the side of the cartridge. This can damage the ink cartridge.

6. Remove the yellow tape.

cCaution:

You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or you may not be able to print.

Do not remove the seal.

Be sure to always install an ink cartridge into the printer immediately following the removal of the current ink cartridge. If the ink cartridge is not installed promptly, the print head may dry out, rendering it unable to print.

7.Place the new ink cartridge in the cartridge holder and press it down until it clicks into place.

8.Close the ink cartridge cover and press it until it clicks into place.

c Caution:

If you find it difficult to close the cover, make sure all the cartridges are firmly seated. Press down on each cartridge until you hear it click into place. Do not attempt to force the cover closed.

30Replacing Ink Cartridges