Epson RX685 Loading Paper, Into the rear feeder

Loading Paper

Into the rear feeder

1. Open and extend the paper support.

2.Move the feeder guard towards you, and then slide the edge guide.

3.Load the paper short edge first, even for landscape printing, with the printable side up.

The printable side is often whiter or brighter than the other side.

4. Slide the paper to the right.

5.Slide the edge guide to the right. Make sure the paper fits under the c arrow mark inside the left edge guide. Set the feeder guard back.

English

10 ⋅ 15 cm (4 ⋅ 6 in.) and

13 ⋅ 18 cm (5 ⋅ 7 in.)

Follow the same steps to load A4 paper.

A4

6. Open and extend the output tray.

cCaution:

Make sure the CD/DVD guide is not ejected before you start printing.

Note:

Make sure the Paper Feed setting is set to Rear before you start printing.

Handling Paper 7