Adjusting the Projection Position (Image Shift)

Adjusting the Projection Position (Image Shift)

When you cannot setup this projector directly in front of the screen, the projection position can be finely tuned without moving this projector.

1Using the button on the projector, perform zoom adjustment or keystone correction. See the Quick Setup sheet.

The Image Shift adjustment screen is displayed after you finish making adjustments.

2Adjust projection position.

16

Using the Remote Control

Using the Control Panel

3Press the [Esc] button to close the adjustment screen.

The screen closes automatically if no operations are performed for about 10 seconds.

p

• The projection position cannot be adjusted when zoom is set to

maximum "wide".

• Even if you turn the power supply off, the "Image Shift" settings you

 

make are kept. When either the projector position or the angle of the

 

projector is changed, you can readjust or perform the following

 

operations.

Control Panel

Press and hold down the [Wide] and [Tele] buttons for more than one second.

•You can also make adjustments from the configuration menu. See page 33.