Epson S4 Replacing the Air Filter, 2Remove the air filter, 3Install the new air filter

Replacing Consumables

44

Replacing the Air Filter

If the air filter is broken or if a warning message reappears after it has been cleaned, it should be replaced.

The air filter can be replaced even if the projector is installed on a ceiling.

1Turn off the projector’s power, wait until it beeps twice, and disconnect the power cable.

2Remove the air filter.

Put your finger into the recess of the air filter and slide it out to remove it.

Recess

3Install the new air filter.

Slide in the new air filter and press until it clicks into place.

Dispose of used air filters properly in accordance with your local p regulations.

Air filter frame: Polycarbonate, ABS plastic

Filter: Polyurethane foam