Problem Solving

56

The remote control does not work

Check

Remedy

 

 

Is the remote control light-emitting area pointing

Point the remote control towards the projector or the screen.

towards the front or back of the projector, or toward

The operating angle for the remote control is approximately ±30º horizontally and approximately ±15º vertically.

the screen?

 

 

 

Is the remote control too far from the projector?

The operating range for the remote control is approximately 6 meters (20 feet).

 

 

Is direct sunlight or strong light from fluorescent lamps

Set the projector up in a location where strong light will not shine onto the light-receiving area.

shining onto the projector’s light-receiving area?

 

 

 

Are the batteries dead, or have the batteries been

Insert new batteries, making sure that they are inserted correctly. See page 40.

inserted correctly?

 

 

 

Has a remote control button been pressed for more

If any of the buttons on the remote control are pressed down for more than 30 seconds, the remote control stops

than 30 seconds?

sending signals (remote control's sleep mode). This prevents the batteries from being consumed due to something

 

being placed on top of the remote control.

 

When the button is released, normal remote control operation will resume.