Problem Solving

55

Problems when projection starts

Power does not turn on

Check

Remedy

 

 

Have you pressed the [Power] button?

Press the [Power] button to turn the power on.

 

 

Are all of the indicators switched off?

The power cable is not connected correctly or power is not being supplied. Connect the power cable to the

 

projector correctly. See the Quick Setup sheet.

 

Check the circuit breaker to see if power is being supplied.

 

 

Do the indicators turn off and on when the power

There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power

cable is touched?

cable. If this does not solve the problem, stop using the projector, disconnect the power cable from the wall outlet

 

and contact Epson (see page 57).

 

 

Other problems

No sound can be heard or the sound is faint

Check

Remedy

 

 

Is the audio source connected correctly?

Check that the cable is connected to the Audio port.

 

 

Has the volume been adjusted to the minimum

Adjust the volume so that sound can be heard. See page 17.

setting?

 

 

 

Is A/V Mute mode active?

Press the [A/V Mute] button on the remote control to cancel the A/V mute function. See page 19.

 

 

Is the lens cover still closed?

Open the lens cover.