Adjusting the Volume

17

Adjusting the Volume

The volume of the projector's built-in speaker can be adjusted as follows.

Remote control

When the button is pressed to the [] side, the volume increases, and when it is pressed to the [] side, the volume decreases.

The volume gauge appears on the screen when the volume is being adjusted.

• If the value displayed in the gauge on the screen stops changing when the p volume is being adjusted, it indicates that the limit for volume adjustment

has been reached.•The volume can also be adjusted using the configuration menu. See page 34.

Selecting the Image Source

The image source is the projector port to which your video equipment is connected. You can select the image source automatically, using Source Search as described below. Or you can select a source yourself as described on page 18.

Automatically Detecting the Source (Source Search)

Source Search automatically detects the picture signal from connected equipment and projects the image.

1Turn on your computer or video equipment. If you are viewing a tape or DVD, start playback.

2Press the Source Search button.

Using the Remote Control

Using the Control Panel