4. Printing is performed and paper is output.

Self test print example

5.The printer is ready to receive data as soon as it completes the self test. Normal printing is now possible.

Note:

If this self test is not possible, try a self test by hand feeding paper ("Feeding paper by hand" on page 3- 13).

3.6.1.2 With the roll paper specification

Note:

You can check the operation of the autocutter with the self test when the roll paper holder is installed.

1.Check that the printer is turned off, the printer cover is closed, and the roll paper holder is installed properly.

2.Install roll paper.

3.While pressing FEED, turn on the printer.

4.Printing is performed and the paper is cut.

Self test print example

5.The printer is ready to receive data as soon as it completes the self test. Normal printing is now possible.

Note:

If this self test is not possible, try a self test by hand feeding paper ("Feeding paper by hand" on page 3- 13).

3-12Using the Printer

Rev. C

Page 42
Image 42
Epson TM-C100 manual 12Using the Printer Rev. C, With the roll paper specification