Product Specifications of the TM-C100 | Epson specification

TM-C100 Technical Reference Guide

Appendix A

Product Specifications of the TM-C100

A.1 Product Specifications

Item	Specification

Interface (compatible)	USB

Power supply	Power supply with a dedicated AC adapter

Input voltage (rated)	Input voltage (rated) 90 (100 - 10%) to 264 (230 + 15%) VAC

Frequency (rated)	47 to 63 Hz

Power consumption	Operating	Average:	Approximately 11 W
		Peak:	Approximately 13 W
	Idling	Average:	Approximately 1 W

Applicable standards	Europe:	CE marking EMC Directive: 89/336/EEC
		EN55022 Class B
		EN55024
		IEC61000-4-2
		IEC61000-4-3
		IEC61000-4-4
		IEC61000-4-5
		IEC61000-4-6
		IEC61000-4-11
		Safety standard: TÜV (EN 60950)

	North	EMI: FCC/ICES-003 Class A
	America:	Safety Standard: UL 60950/CSA C22.2 No. 60950

	Oceania:	EMC: AS/NZS 3548/CISPR22 Class B

	Japan:	EMI: VCCI Class A

Reliability	Product	Mechanism	12,000,000 passes (6,000,000 carriage returns)
	lifetime:	Print head	1,600,000,000 shots/nozzle
			(Shots are the numbers of pulses energized for the print
			head.)
		Autocutter	Plain paper, special fine paper 350,000 cuts
			Special matte paper, plain borderless label paper
			200,000 cuts
		ASF	200,000 sheets
			(The end of product lifetime is when the printer reaches
			the start of the wear-out failure period.)

MTBF	180,000 hours (Failure is defined as a random failure occurring during the random
	failure period.)

MCBF	30,000,000 passes
	This is an average failure interval based on failures relating to wearout and random
	failures up to the life of 12,000,000 passes.

Temperature and humidity	Printing:	10 to 35ºC, 20 to 80% RH no condensation
	Storage:	Packaged for shipping –20 to 60ºC, 5 to 85% RH no condensation
			(Ink not loaded)
			(within 120 hours at –20ºC or 60ºC)
		Ink loaded –20 to 40ºC, 20 to 85% RH
Absolute maximum rated	70ºC (This temperature must NOT be exceeded whenever it is operating or in
temperature	storage.)

Pressure (elevation)	Printing:	775 to 1,050 hPa (corresponding to 0 to 2,000 m above sea level)
	Operating:	700 to 1,060 hPa (corresponding to 0 to 2,500 m above sea level)

Rev. C

Product Specifications of the TM-C100 A-1

Image 47

Epson manual Product Specifications of the TM-C100

Contents

TM-C100 Technical Reference Guide Page TM-C100 Technical Reference Guide Revision Information Rev. C Important Safety InformationKey to Symbols Iii Restriction of Use Modular connectors Aim of the Manual Contents of the ManualAbout This Manual Related Software and Documents Related Software and Documents Product Outline TM-C100 Technical Reference Guide Viii Printer types FeaturesProduct Specification 2Product Outline Rev. C Standard AccessoriesTM-C100 related products Roll paper ConsumablesInk cartridges 4Product Outline Rev. C Standard size paper Part names Part Names and Basic Operations 2Setup Rev. C Control panel Power switch Cleaning switch 4Setup Rev. C Setup Procedure Installing the ASF auto sheet feeder unit Printer SetupInstalling options 6Setup Rev. C Attach the paper support Connection procedure Connecting the power unit8Setup Rev. C Installing the roll paper holder Installing the ink cartridge Setup Rev. C Connecting the printer to the host PC / POS terminal Advanced Printer Driver APD Installing a Printer Driver in the Host PC / POS TerminalInstall and Setup Installation and setup Start Run CheckHealth and perform the device communication test Contents of the Epson OPOS-X ADK package Setup Rev. C How to set and replace the paper How to Set, Replace, and Print on the PaperWith the auto sheet feeder ASF specification Printing method With the roll paper specification2Using the Printer Rev. C How to install and replace paper Rev. C Using the Printer Feeding and printing paper by hand 4Using the Printer Rev. C Replacing the Ink Cartridge 6Using the Printer Rev. C Using the maintenance utility of the driver MaintenanceInk head cleaning Using the switch on the printer Flashing LEDs Troubleshooting8Using the Printer Rev. C Paper is not supplied from the ASF Paper being printed does not come outPaper jam occurred Hand fed printing is not possible Paper is not cut roll paper specification10Using the Printer Rev. C Self Test Procedure FAQPrinting on long paper roll paper specification Making fine color adjustments such as color matching With the roll paper specification 12Using the Printer Rev. C Feeding paper by hand 14Using the Printer Rev. C Bar Code Printing Using the Windows Advanced Printer DriverUsing OPOS-X Fonts Precautions When Using OPOS-XSelecting the feed type ASF specification Paper size Product Specifications Product Specifications of the TM-C100 2Product Specifications of the TM-C100 Rev. C Approximate printing speed Printing Specifications Roll Paper Specification Plain paper/special paper Print area and cutter position Plain borderless label paper Or less ASF Specification For standard printing Print area Or less Or more Feed direction Hand Fed Paper Specifications Color Case SpecificationsExternal Dimensions and Weight Outline drawing Roll paper specification ASF specification Epson Advanced Printer Driver components Control MethodWindows Driver Epson Advanced Printer Driver Epson Advanced Printer Driver Outline Epson Advanced Printer Driver support environment 2System Design Rev. C Epson Opos ADK components Epson Opos ADK Outline Epson Opos ADK support environment How to Obtain the Driver4System Design Rev. C Page Seiko Epson Corporation