Connecting the Drawer | Epson TM-T88II Series manual

2.If the printer has a serial interface, tighten the screws on both sides of the cable connector.

If the printer has a parallel interface, squeeze the wire clips on the printer together until they lock in place on both sides of the connector.

3. Attach the other end of the cable to the computer.

Connecting the Drawer

WARNING:

Use a drawer that matches the printer specifications. Using an improper drawer may damage the drawer as well as the printer.

Setting Up the Printer 1-3

Image 15

Epson TM-T88II Series user manual Connecting the Drawer

Contents

TM-T88II Series Der Thermalkopf ist heiß Printer Parts and LabelsLabels Thermal head is hot La téte thermique est chaude Installing and Replacing Paper Solving ProblemsQuick Reference Page EMC and Safety Standards Applied Product Name TM-T88II Model Name M129BIii CE Marking FCC Compliance StatementFor American Users Gereäuschpegel Setting Up and Using About This ManualReference Application Software FeaturesIntroduction Printing Viii Introduction Options and Accessories Contents Appendix a DIP Switch and Paper Near End Settings Setting Up the Printer Setting Up the PrinterUnpacking Connecting the Cables and Grounding the Printer Connecting the computer2Setting Up the Printer Connecting the Drawer Anschließen der Schublade 4Setting Up the Printer Grounding the Printer Connecting the Power SupplyPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown Running the self test Using the Power Switch Cover10Setting Up the Printer Self Test Self test printing Please press the Paper Feed button 12Setting Up the Printer Adjustments and Settings Control Panel Using the PrinterUsing the Printer Operating the Control Panel Panel lights 2Using the Printer Printing problems TroubleshootingTroubleshooting General problems Error light is off, but nothing is printed 2TroubleshootingPrinting is poor Cleaning the print head Paper handling problemsPaper is jammed inside the printer 4Troubleshooting Auto cutter is jammed Auto cutter problems 6Troubleshooting Hexadecimal Dump 8Troubleshooting Printing Specifications Reference InformationReference Information 2Reference Information Line spacing default 4.23 mm 1/6 Paper Specifications Paper rollSingle-ply Electrical Characteristics CurrentConsumption at Life TemperatureReliability Environmental Conditions 6Reference Information Serial interface specifications DIP Switch and Paper Near End SettingsSetting the DIP Switches DIP switch functions 2DIP Switch and Paper Near End Settings Print Density Selection DIP Switch and Paper Near End Settings A-3 4DIP Switch and Paper Near End Settings Parallel interface specifications DIP Switch and Paper Near End Settings A-5 6DIP Switch and Paper Near End Settings Changing the DIP switch settings DIP Switch and Paper Near End Settings A-7 Adjusting the Paper Near End Detector 1999.12